Superbond EP(Super Polymer)

Superbond EP is a Super Polymer specially developed to improve the properties of cementations compositions. When it is used in combination with standard quality of ordinary Portland cement, it enhances the mechanical properties, such as bonding with various building materials, flexural, compression and impact strength. It is also highly recommended for repair mortars, the resultant composite has drastic improved tensile and flexural properties.

Features / Advantages:

• Increases flexural and tensile strength .

• Compressive strength is comparable with concrete.

• Reduced shrinkage, water permeability.

• Good bonding between old & new concrete.

• High strength mortar with good resilience .

• Durable structural repairs, restoration & waterproofing .

• Improved abrasion resistant flooring .

Typical Applications :

1) Polymer Cement Bonding Coat

To prepare a polymer based bonding coat, take 1 part Superbond EP and 0.5 kg cement ( by weight) and mix thoroughly. Use a mechanical mixer preferably. The materials thus mixed, form a thick slurry, of a consistency easily applicable by brush. The slurry thus prepared is ready for use as a bonding material.The surface on which the bonding coat is to be applied, has to bcleaned with a water jet approximately 24 hours prior to application. This will help in making the substrata, slightly moist. After application of the slurry on the requisite surface, place the next screed or mortar etc that is to come over it. ("wet on wet" application )